Reasons Why Your Nissan Qashqai Key Fob Won't Work
The Qashqai has a distinctly SUV feel to it thanks to its bigger dimensions, and the ride on 19-inch wheels in Ti and ST-L models can be a bit spongy at times. The front tyres on the Qashqai may also lose grip on rough surfaces, and its CVT can sometimes display wrist-flexing torque steering.
This is usually the result of the battery being dead, which can be replaced in a matter of minutes. Make sure the battery you replace is of the same voltage, size and specification.
Water Damage
One of the most common reasons a Nissan key fob will give the "key ID is incorrect" message is due to water damage. The key fob is fitted with rubber seals which protect the chip inside. However, prolonged exposure to moisture could cause it to cease functioning properly. This is typically the case when you drop your key fob into the ocean or a pool water pool, but it could happen when it's wet from rain or soapy hands.
If your key fob has been exposed to water for a lengthy period of time, it could need to be cleaned with isopropyl ethanol or electronic cleaner. It may also need to be taken to an expert to repair or replace it.
If your key fob requires to be replaced, it is an easy process. Make sure you have the right multipack (CR2032 3V). Open the front and rear cases with the flat-head screwdriver. You'll need to take out the clips that hold the metal together and pull out the battery that was in place, and then insert the new one. Reassemble the fob and replace the mechanical key. Make sure it's working properly. If it isn't then you'll need to take it to a local Nissan dealer or an experienced locksmith to replace the chip on the key. Fortunately the chip isn't usually damaged by water exposure which means that this shouldn't be too expensive.
Dead Coin Battery
Another common reason the reason your Nissan Qashqai key fob may not function is that the battery inside is dead. These batteries usually last 3-5 years but can go bad over time, especially when the fob is frequently dropped. You could replace the battery however, make sure it's the same voltage and same size as the original. If you are using a different battery it may cause the key to have an incorrect key ID, which could prevent it from connecting to your vehicle.
The best method to replace the battery of a coin in the Nissan Qashqai Key Fob is to pry it open using a small flat-head screwdriver. The screwdriver needs to be inserted into a small notch on the bottom of the key fob. Gently twist the screwdriver to divide the two halves. Remove the old CR2025 battery and replace it with a brand new one, noting the position of the old one in the fob.
Before putting the new battery into place, make sure there is no dirt or water damage to the terminals. If there is, wash the terminals with a tiny amount of isopropyl alcohol. You'll also want to ensure that the pole cables are plugged in correctly. They must be connected to the negative and positive poles of your battery, respectively.
nissan car key replacement price of a fault
If your Nissan Qashqai's keys fob isn't working after exposure to water that is clean from a tap or rain, this could be a sign that there's a problem with the internal chip. The battery replacement won't fix this, and you'll need to buy a new key fob. If the key fob has stopped working after dropping it, it is likely that the chip inside was damaged. It is possible to get the key fob back to work once again if it is removed and clean the chip with paper towel and isopropyl alcohol, then put it back into.
Key ID Incorrect is a common mistake that you might see on the dashboard of your vehicle. This means that the vehicle cannot recognize the key fob and will not allow it to start the engine. The issue could be caused by several things including water damage, undetectable issues in the key fob's circuitry, or RFID interference.
The key fob will cease to function in the event that the batteries with 12 volts are dead or fail to provide sufficient electric current. This could affect the remote keyless system as well as central locking on your Nissan Qashqai, as well as making it impossible to start your engine using the key fob (if equipped with Intelligent Key). If you are unable to lock or unlock the door manually it is recommended to check the batteries on your key fob and make sure they are in good shape. You may also try reinserting the battery to reset the transmitter.
Reprogramming
Unless the key fob has been submerged in salt water, it should be able to be restored to its original state after a simple rinse with clean water. You might also try cleaning your electronic chip with isopropyl alcohol or an electronic cleaner. If these methods don't work, it may be time to replace the entire key fob with a new one.
If your Nissan Intelligent Key is still not functioning, there may be an issue with the connection between it and the car. To relink it, start by turning the key in the ignition, without turning on the car. Continue doing this until the hazard lights flash twice. Then, turn the car off and take out the keys.
Open the fob compartment in your vehicle. This is usually located in the door jamb, on the driver's side door handle or under an armrest. Find the small button labeled "program" and press it. Once the process is completed, you should hear the sound of a chime.
It's time to test your Intelligent Key to the test. Set your feet a distance from the vehicle, then hit all the buttons on it. If the lights flash and the horn sound it means the key has been successfully linked to the Nissan. It is also possible to test the key in close proximity.